YSI 6500 Environmental Process Monitor - Manual (Page 30)

System Setup Section 3
3.3.2
DISPLAY SETUP
Now highlight the Display selection from the Main menu and press Enter. The following screen
will appear.
The Display menu contains options concerning the visual display of the 6500 Monitor. Use the
↑↓ arrows to highlight the desired display feature. Press Enter to select the feature.
First, highlight the Adjust contrast selection. This option allows the user to select the optimal
screen contrast for the existing light conditions. Press Enter to access the Adjust contrast feature
and the following display will appear.
Using the
↑↓ arrows, select the desired screen contrast. Then press Esc to return to the Display
menu.
Tip: There is an alternate Adjust contrast feature. From the Run display screen, press and hold
the Cal key while using the
↑↓ arrow keys to change contrast. This may be especially useful if
bright sun or low light conditions make the display screen difficult or impossible to read.
Now highlight Relay status. This feature can be enabled and disabled by toggling the Enter key.
If enabled a check mark will appear in the box and the display in the Run mode will contain a bar
YSI Incorporated 6500 Environmental Process Monitor 26