YSI 6500 Environmental Process Monitor - Manual (Page 100)

Accessories Appendix D
5. Tighten all remaining u-bolts to secure the pipe.
6. Remove the probe guard and install the sonde adapter, with the groove toward the sonde body
as shown in Figure 28, and reinstall the probe guard.
7. Connect the cable to the sonde and slowly slide the sonde down the pipe until it rests on the
Stop Cap.
8. Connect the cable to the 6500 Environmental Process Monitor or Breakout box.
Figure 28
Stop Cap
Adapter
YSI Incorporated 6500 Environmental Process Monitor 97