AVSL 169.010 Chord Micro MU Controller - Manual (Page 9)

Chord Micro MU Controller User Manual
- 9 -
Trigger pads
Depending on the assign type, the trigger pads can transmit note messages or control change
messages. For each trigger pad, you can individually specify the assigned message, the MIDI
transmit channel, the behavior of the trigger pad, the note number, the control change number
and the values transmitted when the pad turns on or off.
Depending on its assign type, note number or control change number can be assigned to a
single trigger pad and transmitted. If you transmit note messages or control change message
from a trigger pad, these messages will be transmitted at the velocity or on/off value from the
pad.
MIDI Channel [1...16/Global MIDI Channel] This specifies the MIDI channel that the MIDI
messages are transmitted to when you strike the trigger pad. If you set this to “Global MIDI
Channel,” the messages will be transmitted on all MIDI channel.