AVSL 174.201 DS-50 - Manual

DS-50 Distortion Pedal
174.201UK
Functions
1. LEVEL – Adjusts the output level
2. TONE – Varies the frequency bias, clockwise from low to high
3. DIST
– Adjusts the amount of distortion and sustain given to the signal
4. Output
– 6.3mm mono jack connector
5. D.C. In
– DC jack for optional mains adapter
6. Input
– 6.3mm mono jack connector
7. Indicator LED – Shows when effect is on (when it appears dim, replace battery)
8. Pedal Switch – Turns Effect On/Off
9. Battery housing
– Compartment underneath for 9V battery
Notes on use

Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery

Before connecting to an instrument, ensure amplifier volume is turned down
Specifications

Input Impedance: 470k
Ω

Output Impedance: >10
kΩ

Power Supply: 9Vdc (battery or optional mains adapter) 8mA
© chord 2009
www.chordmusicuk.com