AVSL 169.010 Chord Micro MU Controller - Manual (Page 12)

Chord Micro MU Controller User Manual
- 12 -
Right Value [0...127] Specifies the value of the control change message transmitted when
you turn the knob all the way to the right.
Sliders
Operating a slider will transmit a control change message. You can enable/disable each slider,
specify its control change number, and specify the values transmitted when the slider is moved
fully upward or fully downward.
Slider Enable [Disable/Enable]
Enables or disables the slider. If a slider has been disabled, moving it will not transmit a MIDI
message.
Control Change Number [0...127]
Specifies the control change number of the control change message that is transmitted.
Upper Value [0...127]
Specifies the value of the control change message transmitted when you move the slider all the
way upward.