AVSL 169.010 Chord Micro MU Controller - Manual (Page 14)

Chord Micro MU Controller User Manual
- 14 -
Key Enable [Disable/Enable]
Enables or disables the key. If a key is disabled, operating that key will not transmit a MIDI
message.
Key Behavior [Momentary/Toggle]
Selects one of the following two modes:
Momentary Pressing the key will send a control change message with the
“ON” value,
releasing the key will send a control change message with the
“OFF” value.
Toggle The key will act as a latching switch-pressing once for “ON” and again for “OFF”
alternately.
Control Change Number [0...127]
Specifies the CC number of the control change message that will be transmitted.
On Value [0...127]
Specifies the “ON” value of the control change message.
Off Value [0...127]
Specifies the “OFF” value of the control change message.
●Specifications
Connectors: USB connector (mini B type)
Power supply: USB bus power mode
Current consumption: 100 mA or less
Dimensions (W x D x H): 12.6 x 7.5 x 1.6 inches / 320 x 190 x 40 mm
Weight: 28 oz / 3600 g
Included items: USB cable, Owner’s manual
*Specifications and appearance are subject to change without notice.
www.avsl-chord.com