AVSL 169.010 Chord Micro MU Controller - Manual (Page 11)

Chord Micro MU Controller User Manual
- 11 -
Rotary Knobs
Operating a knob will transmit a control change message. You can enable/disable each knob,
specify its control change number, and specify the values transmitted when the knob is turned
fully left or fully right..
Enable [Disable/Enable]
Enables or disables the rotary knob. When disabled, turning the control will not transmit a MIDI
message.
Control Change Number [0...127]
Specifies the control change number of the control change message that is transmitted.
Left Value [0...127]
Specifies the value of the control change message transmitted when you turn the knob all the
way to the left.