AVSL 169.010 Chord Micro MU Controller - Manual (Page 7)

Chord Micro MU Controller User Manual
- 7 -
●Setup
Minimum System Requirements for Micro MU controller
Windows Mac OS
Pentium 3 800 MHz or higher Macintosh G3*800/G4*733 MHz or higher
(CPU requirement may be higher for laptops) (CPU requirement may be higher for laptops)
256MB RAM OS X 10.3.9 with 256 MB RAM,
Direct X 9.0b or higher OS X 10.4.2 or greater with 512 MB RAM
Windows XP(SP2)or higher *G3/G4 accelerator cards are not supported
(Windows 98,Me,NT or 2000 not supported)
●Making detailed settings
The following settings cannot be edited on the Micro MU instrument, so you need to use the
Micro MU Editor software for these.
Micro MU control Editor can be downloaded from www.avsl-chord.com .
Global MIDI channel
Global MIDI channel [1...16] This specifies the MIDI channel which Micro MU will use to
transmit note messages, as well as MIDI messages that will be send when you press the
button. This should be set to match the MIDI channel of the software application that is being
used.
Keyboard CC mode channel
Piano keyboard CC mode channel is to specify which MIDI channel the keyboard will use to
transmit control messages.