AVSL 174.222 PH-50 User Manual
Ph-50 phaser pedal
PH-50 Phaser Pedal
174.222UK
Functions
1.
RATE
– Adjusts the speed of the phase shift rotation
2.
RES
– Adjusts the resonance/feedback, altering the focus of the phasing effect
3.
DEPTH
– Adjusts the amount by which the phase is shifted
4.
Output
– 6.3mm mono jack connector
5.
D.C. In
– DC jack for optional mains adapter
6.
Input
– 6.3mm mono jack connector
7.
Indicator LED
– Shows when effect is on (when it appears dim, replace battery)
8.
Pedal Switch
– Turns Effect On/Off
9.
Battery housing
– Compartment underneath for 9V battery
Notes on use
Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery
Before connecting to an instrument, ensure amplifier volume is turned down
Specifications
Input Impedance: 1MΩ
Output Impedance: 10
kΩ
Power Supply: 9Vdc (battery or optional mains adapter) 14mA
© chord 2009
www.chordmusicuk.com