AVSL 174.216 CM-50 - Manual

CM-50 Compressor Pedal
174.216UK
Functions
1. LEVEL
– Adjusts the overall output level
2. COMP
– Adjusts the degree of dynamic compression applied to the signal
3. SUSTAIN
– Varies the amount of sustain ratio given to the signal as a component of the
compression effect
4. Output – 6.3mm mono jack connector
5. D.C. In – DC jack for optional mains adapter
6. Input
– 6.3mm mono jack connector
7. Indicator LED
– Shows when effect is on (when it appears dim, replace battery)
8. Pedal Switch
– Turns Effect On/Off
9. Battery housing – Compartment underneath for 9V battery
Notes on use

Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery

Before connecting to an instrument, ensure amplifier volume is turned down
Specifications

Input Impedance: 470k Ω

Output Impedance: >10 kΩ

Power Supply: 9Vdc (battery or optional mains adapter) 10mA
© chord 2009
www.chordmusicuk.com