AVSL 169.010 Chord Micro MU Controller - Manual (Page 10)

Chord Micro MU Controller User Manual
- 10 -
Assign Type [No Assign/Note/Control Change]
This specifies the type of message that will be assigned to the trigger pad. You can disable the
pad (no assignment), or assign a note message or a control change to the pad.
Pad Behavior [Momentary/Toggle]
You can choose one of the following two types of behavior for the trigger pad.
Momentary The Note On or On Value will be transmitted when you press the trigger pad, and
the Note Off or Off Value will be transmitted when you release it.
Toggle The pad will act as a latching switch-pressing once for
“ON” and again for “OFF”
alternately.
Note Number [C-1...G9/No Assign]
This specifies the note number of the note message that is transmitted.
Control Change Number [0...127/No Assign] [0...127] This specifies the control change
number of the control change message that is transmitted.
On Value [0...127] Specifies the value of the message that is transmitted when the trigger pad
turns on.
Off Value [0...127] Specifies the value of the message that is transmitted when the trigger pad
turns off.
(
You can set this only if the assign type is “Control Change.”)