AVSL 174.207 HM-50 - Manual

HM-50 Heavy Metal Pedal
174.207UK
Functions
1. D.C. In
– DC jack for optional mains adapter
2. Indicator LED
– Shows when effect is on (when it appears dim, replace battery)
3. LEVEL
– Adjusts the output level
4. LOW
– Adjusts the low frequency content of the distorted effect
5. HIGH – Adjusts the high frequency content of the distorted effect
6. MIDDLE – Adjusts the middle frequency content of the distorted effect
7. MID FREQ – Sets the frequency range at which the MIDDLE control operates
8. Pedal Switch – Turns Effect On/Off
9. Input
– 6.3mm mono jack connector
10. Battery housing
– Compartment underneath for 9V battery
11. Output
– 6.3mm mono jack connector
12. DIST – Adjusts the level of distortion and sustain applied to the signal
Notes on use

Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery

Before connecting to an instrument, ensure amplifier volume is turned down
Specifications
 Input Impedance: 1MΩ
 Output Impedance: 1kΩ

Power Supply: 9Vdc (battery or optional mains adapter) 18mA
© chord 2009
www.chordmusicuk.com