Asus RS120-E3/PA2 - Manual (Page 41)

2 - 2 5 2 - 2 5 2 - 2 5 2 - 2 5 2 - 2 5 A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 )
2.8.6 2.8.6 2.8.6 2.8.6 2.8.6 Motherboard Motherboard Motherboard Motherboard Motherboard
To uninstall the motherboard:
1. Disconnect all the pre-connected cables from the motherboard.
See section “2.6 Cable connections” for details.
2. Uninstall all the devices from the motherboard including the CPU and
heatsink, riser card bracket, and DDR DIMMs. Refer to the
corresponding sections for instructions on removing these
components.
3. Use a Philips (cross) screwdriver to remove the screws that secure
the motherboard to the base of the chassis.
Refer to the illustration below for the location of the motherboard
screws.
4. Carefully lift the motherboard
out of the chassis as shown.
P5MT-R
®
To reinstall the optical drive, follow the instructions in the previous chapter
in a reverse order.
When installing a new optical drive, make sure to remove the drive front
panel assembly and tray bezel before installing it to the chassis.