Asus RS120-E3/PA2 - Manual (Page 36)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0
2.8.2 2.8.2 2.8.2 2.8.2 2.8.2 System fan with dummy case System fan with dummy case System fan with dummy case System fan with dummy case System fan with dummy case
The system fan for the memory module(s) comes with a dummy case that
allows it to fit in the fan cage.
To replace the system fan with dummy case:
1. Uninstall the fan following the
instructions in the previous
section.
2. Pull the dummy case to the
direction of the arrow just
enough to disengage its pegs
from the system fan.
To reinstall the system fan with the dummy case:
1. Insert the fan cables to the dummy case cable bay.
2. Turn the dummy case to the direction of the arrow.
3. Insert the dummy case pegs to the system fan holes until it fits in place.
4. Reinstall the system fan by following the instructions in the previous section.
3. Turn the dummy case above the
system fan, then remove the
fan cables by pulling them
through the dummy case cable
bay.
4. Replace the system fan.
P e g P e g P e g P e g P e g
P e g P e g P e g P e g P e g
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3