Asus RS120-E3/PA2 - Manual (Page 38)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2
2.8.4 2.8.4 2.8.4 2.8.4 2.8.4 Power supply module Power supply module Power supply module Power supply module Power supply module
To uninstall the power supply module:
1. Disconnect all the power cables
connected to the motherboard
and other system devices.
2. Use a Phillips (cross)
screwdriver to remove the
screws that secure the front
end of the power supply.
4. Slide the power supply forward
for about half an inch, then
carefully lift it out from the
chassis.
3. From the rear panel, remove
two screws that secure the
power supply from the chassis.