Asus RS120-E3/PA2 - Manual (Page 22)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 6 2 - 6 2 - 6 2 - 6 2 - 6
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
6. Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
A
B
The motherboard supports Intel ® Pentium ® 4 LGA775 processors with
the Intel ® Enhanced Memory 64 Technology (EM64T), Enhanced Intel
SpeedStep ® Technology (EIST), and Hyper-Threading Technology. Refer
to the Appendix for more information on these CPU features.
2. Twist each of the four screws
with a Philips (cross) screwdriver
just enough to attach the
heatsink to the motherboard.
When the four screws are
attached, tighten them one by
one to completely secure the
heatsink.
2.2.2 2.2.2 2.2.2 2.2.2 2.2.2 Installing the CPU heatsink and airduct Installing the CPU heatsink and airduct Installing the CPU heatsink and airduct Installing the CPU heatsink and airduct Installing the CPU heatsink and airduct
To install the CPU heatsink:
1. Carefully place the heatsink on
top of the installed CPU.