Asus RS120-E3/PA2 - Manual (Page 139)

A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) 6 - 3 5 6 - 3 5 6 - 3 5 6 - 3 5 6 - 3 5
6.3.3 6.3.3 6.3.3 6.3.3 6.3.3 Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e, then
press . This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume1
RAID10(RAID0+1)
Select Disks
128KB
0.0 GB
Create Volume
[ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
2. Enter a name for the RAID 10 set, then press .
3. Highlight R A I D L e v e l R A I D L e v e l R A I D L e v e l R A I D L e v e l R A I D L e v e l, press the up/down arrow key to select
|R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ), then press .
4. Follow steps 4 to 9 of section “6.3.1 Creating a RAID 0 set (striped)”
to create the RAID 10 set.