Asus RS120-E3/PA2 User Manual
Page 119
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
6 - 1 5
6 - 1 5
6 - 1 5
6 - 1 5
6 - 1 5
6.2.3
6.2.3
6.2.3
6.2.3
6.2.3
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration
using the V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n command.
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
To add a new RAID configuration:
1.
From the Management Menu, highlight Configure
C o n f i g u r e
C o n f i g u r e
C o n f i g u r e
C o n f i g u r e, then press
2.
Use the arrow keys to select V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n, then press
3.
The A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U displays the available drives
connected to the SATA ports. Select the drive(s) you want to include
in the RAID set, then press
indicator changes from R E A D Y
R E A D Y
R E A D Y
R E A D Y
R E A D Y to ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y], where X is the
array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.