Standard interrupt assignments, Pci bus number, idsel, and irq assignments – Asus RS120-E3/PA2 User Manual
Page 31
2 - 1 5
2 - 1 5
2 - 1 5
2 - 1 5
2 - 1 5
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
2.5.3
2.5.3
2.5.3
2.5.3
2.5.3
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
Configuring an expansion card
After installing the expansion card, configure the it by adjusting the
software settings.
1.
Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2.
Assign an IRQ to the card. Refer to the following tables.
3.
Install the software drivers for the expansion card.
Standard interrupt assignments
Standard interrupt assignments
Standard interrupt assignments
Standard interrupt assignments
Standard interrupt assignments
When using PCI cards on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments. Otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable.
PCI Bus Number, IDSEL, and IRQ assignments
PCI Bus Number, IDSEL, and IRQ assignments
PCI Bus Number, IDSEL, and IRQ assignments
PCI Bus Number, IDSEL, and IRQ assignments
PCI Bus Number, IDSEL, and IRQ assignments
INTA#
INTB#
INTC#
INTD#
REQ#
GNT#
PATA controller
PIRQA#
SATA controller
PIRQD#
SMBus controller
PIRQB#
USB UHCI controller 1
PIRQH#
USB UHCI controller 2
PIRQD#
USB 2.0 EHCI controller
PIRQH#
BCM5721 #1
PIRQA#
BCM5721 #2
PIRQB#
ATI RAGE XL
PIRQD#
REQ1#
GNT1#
PCIX Slot 1 (64-bit)
PXIRQ0
PXIRQ1
PXIRQ2
PXIRQ3
PXREQ0
PXGNT0
PCI Express Slot 2
PIRQA#
PCI Slot 3 (32-bit)
PIRQE#
PIRQF#
PIRQG#
PIRQH#
REQ0#
GNT0#
IRQ
Priority
Standard Function
0
1
System Timer
1
2
Keyboard Controller
2
N/A
Programmable Interrupt
3*
11
Communications Port (COM2)
4*
12
Communications Port (COM1)
5*
13
Sound Card (sometimes LPT2)
6
14
Floppy Disk Controller
7*
15
Printer Port (LPT1)
8
3
System CMOS/Real Time Clock
9*
4
ACPI Mode when used
10*
5
IRQ Holder for PCI Steering
11*
6
IRQ Holder for PCI Steering
12*
7
PS/2 Compatible Mouse Port
13
8
Numeric Data Processor
14*
9
Primary IDE Channel
15*
10
Secondary IDE Channel
*These IRQs are usually available for ISA or PCI devices.