Asus A7N8X Deluxe - Manual (Page 39)

ASUS A7N8X motherboard user guide 25
8) IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s IDE activity LED. Read and
write activity by devices connected to the Primary or Secondary IDE
connectors cause the IDE LED to light up.
A7N8X ®
A7N8X IDE Activity LED
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED1
7) Audio Connectors (Three 1/8” AUDIO) (Optional)
For a 2-speaker audio output, the Line Out (lime) connects a headphone or
speakers. The Line In (light blue) connects a tape players or other audio
sources. The Mic (pink) connects a microphone.
For a 4 or 6 speaker audio output, the Line In (light blue) connects to other
audio sources. The Line Out (lime) connects to the Left/Right Front Speakers.
The Mic (pink) connects to a microphone. The Surround L/R audio connector
connects to the Left/Right Surround speakers. The Center/LFE connector
connects to the Center speakers or Bass speakers.
Line in
Microphone
Front Speaker
Left/Right
Center/Speaker
Bass Speaker
S/PDIF
Connector
Surround Speaker
Left/Right
In
Mic
Out
NOTE! If you want to use 4/6 speaker output but only has 3 audio jacks
available on your back panel I/O, refer to Chapter 5.7.2.