Asus RAMPAGE IV BLACK EDITION - Manual (Page 87)

ASUS RAMPAGE IV BLACK EDITION 2-21
Chapter 2
9. Connect the OC Panel data cable (A)
and a SATA Power cable (B) to the OC
Panel.
10. Locate the ROG_EXT connector on the motherboard and connect the OC Panel cable.
4. Secure the OC Panel to the OC Panel
5.25-inch drive bay metal case with the
two (2) screws.
Ensure that the OC Panel fits snugly
into the OC Panel 5.25-inch drive bay
metal case.
5. Shut down your computer.
6. Open your computer chassis and remove
the front cover of an available 5.25-inch
drive bay.
7. Align and insert the OC Panel and the
OC Panel 5.25-inch drive bay metal case
assembly into the drive bay.
8. Secure the OC Panel and the OC Panel
5.25-inch drive bay metal case assembly
into the drive bay with four (4) screws.
11. Boot your computer.
12. Press the OC Panel LCM Power button to turn on the OC Panel LCM display.