Asus RAMPAGE IV BLACK EDITION - Manual (Page 55)

ASUS RAMPAGE IV BLACK EDITION 1-39
Chapter 1
2. Intel ® X79 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1; SATA3G_2;
SATA3G_3; SATA3G_4 [black])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc
drives via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel ® Rapid Storage Technology through the onboard Intel ® X79
chipset.
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.5 SATA Configuration for details.
• Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.