Asus RAMPAGE IV BLACK EDITION - Manual (Page 183)

ASUS RAMPAGE IV BLACK EDITION 4-37
Chapter 4
4.4.5 USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click or tap on the top-right corner of the AI Suite 3 main
menu, then select USB 3.0 Boost.
Using the USB 3.0 Boost
1. Connect your USB 3.0 device to the USB 3.0 port.
2. From the USB 3.0 Boost screen, select a USB device.
3. To enable UASP on your USB device, click UASP. To revert to its normal transfer rate,
click Normal.
USB 3.0 Boost
• USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a
list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com.
• The data transfer speed varies with USB devices. For a higher data transfer
performance, use a USB 3.0 device.
Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost.
Refer to section Rear I/O connection of your user manual for more details.
Click or tap to detect the connected USB device
Click or tap
to apply the
settings
Click or tap to
disregard the
settings
Click or tap to
fast-charge your
USB device
Indicates that the
connected USB
device is in charging
mode
Click or tap to stop
charging your USB
device
Click or tap to select the type of USB device
that you wish to charge when the system is off