Chapter 1 – Asus RAMPAGE IV BLACK EDITION User Manual
Page 60
1-44
Chapter 1: Product introduction
Chapter 1
8.
CPU, chassis, and power fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT;
4-pin CHA_FAN1/ CHA_FAN2/ CHA_FAN3; 4-pin OPT_FAN1/ OPT_FAN2 /
OPT_FAN3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
•
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
•
If you install two VGA cards, we recommend that you plug the rear chassis fan cable
to the motherboard connector labeled CHA_FAN1, CHA_FAN2 or CHA_FAN3 for
better thermal environment.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!