Chapter 3 – Asus RAMPAGE IV BLACK EDITION User Manual
Page 145

ASUS RAMPAGE IV BLACK EDITION
3-55
Chapter 3
4.
Select Yes and press
Updater.
5.
Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
BIOS setup of your motherboard user manual for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
This manual is related to the following products: