Asus MES-N - Manual (Page 67)

ASUS MES-N User’s Manual 67
4. BIOS SETUP
4. BIOS SETUP
Boot Sequence
The Boot menu allows you to select among the three possible boot devices listed
using the up and down arrow keys. By using the <+> or key, you can
promote devices and by using the <-> key, you can demote devices. Promotion or
demotion of devices alters the priority which the system uses to search for a boot
device on system power up. Configuration options: [Removable Devices] [IDE Hard
Drive] [SCSI Boot Device] [Other Boot Device]
Removable Device Select [Legacy Floppy]
Configuration options: [Legacy Floppy] [LS120] [ZIP-100] [ATAPI MO]
IDE Hard Drive Select
This field allows you to select the IDE hard disk drive included in the boot se-
quence. Pressing [Enter] will show the product IDs of all your connected IDE hard
disk drives.
Other Boot Device Select [ATAPI CD-ROM Drive]
Configuration options: [ATAPI CD-ROM Drive] [Network]
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to configure
the PCI bus slots instead of using the BIOS. Thus interrupts may be reassigned by
the OS when [Yes] is selected. When a non-PnP OS is installed or to prevent reas-
signing of interrupt settings, select the default setting of [No]. Configuration op-
tions: [No] [Yes]
4.6 Boot Menu
Boot Menu