Asus MES-N - Manual (Page 101)

ASUS MES-N User’s Manual 101
6. SOFTWARE REFERENCE
Configuration
Click the CONFIG button on the Power Control component. In the Config dialog
box you can configure the YSTATION32.
Auto Play
When Auto Play is OFF, the WAVE,
MIDI, CD, and MIX components
open when the YSTATION32 is
started. When Auto Play is ON, data
registered in the play list plays se-
quentially when the YSTATION32
is started.
If Play Mode on the PlayList dialog
box is set to Repeat and Auto Play
is ON, data registered in the play list
plays repeatedly when the
YSTATION32 is started.
Display mode
When Auto Play is ON, you can
decide which components are dis-
played. When set to Select, compo-
nents whose box in the Component Select section are checked are displayed. When
set to Now Playing, only the component currently playing is displayed.
Component Select
The Component Select check boxes allow you to select which components are used
for Auto Play. Components whose box is checked are used for Auto Play. These
settings are active only when the Display mode is set to Select.
Recording Mode
New
Create a new file
Overwrite Overwrite the existing file
Add Append to the current file
Sampling Rate
These buttons allow you to set the sampling rate for recording Wave files.
Type
These buttons allow you choose either mono or stereo Wave file recording.
Data Format
These buttons allow you to set the data format to either 8 or 16 bit.
6. S/W REFERENCE
YST
A
TION32