Asus MES-N - Manual (Page 59)

ASUS MES-N User’s Manual 59
4. BIOS SETUP
4. BIOS SETUP
Slot 1 IRQ, Slot 2 IRQ, Slot 3 IRQ [Auto]
Each PCI slot must have a unique IRQ number to operate. Make sure you do not
choose an IRQ number used by another device. Configuration options: [Auto] [NA]
[3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some display cards that are nonstandard VGA such as graphics accelerators or MPEG
Video Cards may not show colors properly. The setting [Enabled] should correct
this problem. Otherwise, leave this on the setup default setting of [Disabled]. Con-
figuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave on default setting for best performance vs. stability.
Symbios SCSI BIOS [Auto]
[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios SCSI
card. If the Symbios SCSI card is detected, the motherboard’s Symbios BIOS will
be enabled; if no Symbios SCSI card is detected, the onboard Symbios SCSI BIOS
will be disabled.
[Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS
on an external Symbios SCSI card can be used. If your Symbios SCSI card does
not have a BIOS, the Symbios SCSI card will not function. Configuration options:
[Auto] [Disabled]
4.4.3 PCI Configuration
PCI Configuration