Asus MES-N - Manual (Page 20)

20 ASUS MES-N User’s Manual
6) Primary Cable Type Status (PCTS)
Setting this jumper to 80-pin will allow an UltraDMA/66 IDE device that is
connected to the primary IDE connector with a 40-pin 80-conductor IDE cable
to handle transfer rates up to 66MB/s.
Setting PCTS
40 pin [2-3] (default)
80 pin [1-2]
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
5) Onboard LAN Setting (LAN_EN) available on LAN model only
The onboard LAN may be enabled or disabled by this jumper.
Setting
LAN_EN
Enable [1-2] (default)
Disable [2-3]
MES-N Onboard LAN Setting
LAN
Enable
(Default)
3
2
1
Disable
3
2
1 ®
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N
MES-N Primary Cable Type Status
PCTS
40-pin Cable
(Default)
3
2
1
80-pin Cable
3
2
1
®
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N