Asus MES-N - Manual (Page 38)

38 ASUS MES-N User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
7) IrDA-Compliant Infrared Module / Infrared Module Connectors
The NLX-R riser includes an onboard infrared module for wireless transmitting
and receiving of data through the front panel infrared lense. 0The B9-N and
Yeong-Yang risers include an infrared module connector that supports an op-
tional wireless transmitting and receiving infrared module. This module mounts
to a small opening on system cases that support this feature. You must also con-
figure the setting through UART2 Use Infrared (see 4.4.2 I/O Device Configu-
ration) to select whether UART2 is directed for use with COM2 or IrDA. Use
the five pins as shown in Back View and connect an appropriate ribbon cable
from the module to the motherboard’s IR connector according to the pin defini-
tions. An optional consumer infrared (CIR) set connects to the CIR and IR con-
nectors simultaneously for both wireless transmitting and remote control func-
tions through one external infrared module.
Infrared Module / Infrared Module Connector
Yeong-Yang (Front)
YEONG-YANG
The module sends
data through the
front panel’s
infrared window
NLX-R (Back)
®
B9-N
B9-N (Front)
1 5
1: +5 Volt
2: (no connection)
3: IRRX 4: GND
5: IRTX
Back View
+5V IRTX
IRRX
FIR/(NC) GND
Front View
IR
1 2
10 9
IRTX
+5V
FIR
IRRX
GND
CIR +5V
(NC)
GND
(NC)
CIRRX
CIR