Asus MES-N - Manual (Page 19)

ASUS MES-N User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) VGA IRQ Setting (VIRQ)
VIRQ allows you to set the VGA interrupt method. Some TV tuners or MPEG
cards may require the interrupt to be assigned by the onboard chipset, in which
case VIRQ must be enabled (default setting). The default enables the chipset’s
internal interrupt routing.
Setting VIRQ
Enable [2-3] (default)
Disable [1-2]
4) Onboard Audio Setting (AUDIOEN)
The onboard 32-bit PCI audio may be enabled or disabled using this jumper.
Disable the onboard audio if you are using an audio card on the expansion slot.
NOTE: This setting is available only on motherboards with the onboard audio
option.
Setting AUDIOEN
Enable [2-3] (default)
Disable [1-2]
MES-N Onboard Audio Setting
Enable
(Default)
AUDIO_EN
Disable
3
2
1 3
2
1
®
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N
MES-N Onboard VGA IRQ Setting
VIRQ
Enable
(Default)
3
2
1
Disable
3
2
1
®
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N