Asus RS120-E5/PA2 - Manual (Page 93)

ASUS RS120-E5/PA2 5-27
5.6.2 APM Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
to select
whether or not to
restart the system
after AC power loss.
APM Configuration
Restore on AC Power Loss [Last State]
Power On By PCIE Devices [Enabled]
Resume On RTC Alarm [Disabled]
Restore.on.AC.Power.Loss.[Last.State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power.On.By.PCIE.Devices.[Enabled]
Allows you to use PCIE devices to turn on the system. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item
is set to [Enabled], the items RTC.Alarm.Date/ RTC.Alarm.Hour/ RTC.Alarm.
Minute/ RTC.Alarm.Second will become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Power