Asus RS120-E5/PA2 - Manual (Page 111)

ASUS RS120-E5/PA2 6-11
6.2.2 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management.Menu, highlight Configure, then press .
2. Use the arrow keys to select View/Add Configuration, then press .
3. The ARRAY.SELECTION.MENU displays the available drives connected to
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press . When selected, the drive indicator changes from READY
to ONLIN.A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.