Asus RS120-E5/PA2 - Manual (Page 123)

ASUS RS120-E5/PA2 6-23
Using the Objects command
To check data consistency using the Objects command:
1. From the Management.Menu, select Objects, then select Logical.Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then press
.
3. Select Check.Consistency from the pop-up menu, then press .
4. When prompted, use the arrow keys to select Yes from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.