Asus TR-DL - Manual (Page 97)

ASUS TR-DLS User’s Manual 97
5. OS Driver Installation
5. Driver Installation
B. New System Installation
This procedure installs SCO UNIX onto a hard disk drive. This installation is
necessary to build a new UNIX kernel that includes your SDMS driver. During
installation, you are given the option of retaining current partitions on the root hard
disk. For instance, you could have a DOS partition or a user UNIX partition already
established on the drive. For more details on UNIX installation, refer to the SCO
OpenServer Handbook.
1. Link the SDMS BTLD or Bootable OS CD Disc into the UNIX kernel
during installation.
2. Insert the SCO UNIX installation diskette and reboot the system. For SCO
OpenServer 5, this diskette is labeled Boot Disk.
3. At the boot prompt, type
Boot
: link
Press Enter.
4. At the next prompt, type:
slha
Do not remove the boot diskette. Press Enter.
5. When prompted during the installation, insert either the proper installation
diskette or the SDMS BTLD diskette, and press Enter. The system may
prompt you to enter a routine number:
“Please enter which routine (0-53) to replace ‘?’ to list, ‘a’ to add
“slhainit” at the end [default], ‘n’ to do nothing, or ‘q’ to quit”
Enter the indicated routine number that precedes this message. Then the system
may prompt with another inquiry:
“Please enter which routine (0-2) to replace ‘?’ to list, ‘a’ to add
“slhapoll” at the end [default], ‘n’ to do nothing, or ‘q’ to quit”
Enter the indicated routine number that precedes this message.
6. Continue the installation according to the SCO UNIX documentation.
SCO Open Server