Asus TR-DL - Manual (Page 27)

ASUS TR-DLS User’s Manual 27
3. HARDWARE SETUP
3.7 Expansion Cards
WARNING! Unplug the power supply when adding or removing expansion cards
or other system components. Failure to do so may cause severe damage to both
your motherboard and expansion cards.
3.7.1 Expansion Card Installation Procedure
1. Read the documentation for your expansion card and make any necessary
hardware or software settings for your expansion card, such as jumpers.
2. Remove your computer system’s cover and the
bracket plate on the slot you intend to use. Keep
the bracket for possible future use.
3. Carefully align the card’s connectors and press
firmly.
4. Secure the card on the slot with the screw you
removed above.
5. Replace the computer system’s cover.
6. Set up the BIOS if necessary
(see 4.4.3 PCI Configuration)
7. Install the necessary software drivers for your
expansion card.
Peer-to-Peer PCI Bus Configuration Diagram
Expansion Cards
3. H/W SETUP
Socket 370 Socket 370
RCC
CNB30LE
MA
Cntl
MD
100/133MHz
Peer-to-Peer PCI Bus
Configuration Diagram
PCI-1
64-bit PCI-2
64-bit LSI SCSI
1010R/1030
Secondary PCI Bus (66/33MHz)
PCI-3
32-bit PCI-4
32-bit PCI-5
32-bit ATI RageXL
Primary PCI Bus (33MHz)
PCI-6
32-bit
Intel 82550
100/133 MHz
Registered DIMM