Asus TR-DL - Manual (Page 100)

100 ASUS TR-DLS User’s Manual
5. OS Driver Installation
5. Driver Installation
III. ATI Rage XL Display Driver Installation
SCO OpenServer 5.0.6 system can correctly recognize ATI Rage XL graphic
controller (ATI MACH64) during installation. User doesn’t need to load or modify
the video driver for the onboard VGA device.
5.7 SCO UnixWare Server
I. LSI SCSI Driver Installation
A. Building the SCO UnixWare C8XX BTLD Diskette
To create a C8XX BTLD diskette to use with UnixWare 2.1.X or UnixWare 7, copy
the raw dd image file onto a 1.44 Mbytes floppy diskette. This process is dependent
upon the operating system that you are using to create this diskette. See the instructions
below for UNIX System and DOS System Users. After the driver diskette been
created, labeled as “PCI SCSI SCO UnixWare driver”.
For UNIX System Users:
Follow these steps to create the BTLD diskette:
1. Insert a 3.5" diskette into the floppy diskette drive.
2. At the UNIX prompt, type:
dd if=//unixware.dd of=/dev/rfd0
The is where the dd image is located. For UnixWare 2.1.X, the dd
image file is located here:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD
For UnixWare 7, the dd image file is located here:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW7 \UNIXWARE.DD
SCO UnixW
are Server