Asus TR-DL - Manual (Page 59)

ASUS TR-DLS User’s Manual 59
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
Onboard SCSI BIOS [Auto]
[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios SCSI
controller. If the Symbios SCSI controller is detected, the motherboard’s Symbios
BIOS will be enabled; if no Symbios SCSI controller is detected, the onboard
Symbios SCSI BIOS will be disabled.
Setting to [Disabled] disactivates the SYMBIOS SCSI BIOS onboard so that the
BIOS on an add-on SYMBIOS SCSI card can be used. If your SYMBIOS SCSI
card does not have a BIOS, the SYMBIOS SCSI card will not function. Configuration
options: [Auto] [Disabled]
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI functions over
other SCSI controllers. Configuration options: [No] [Yes]
ONB Primary SCSI Term, ONB Secondary SCSI Term [Enabled]
These fields allow you to enable or disable the onboard SCSI termination on the
primary and secondary SCSI channels. Configuration options: [Enabled] [Disabled]
Primary VGA BIOS First [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration options:
[PCI VGA Card] [AGP VGA Card]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
When set to [Enabled], this field allows your computer to boot from the network
using the onboard LAN controller boot ROM. Configuration options: [Disabled]
[Enabled]