Os driver installation, Iii. ati rage xl display driver installation – Asus TR-DL User Manual

Page 85

ASUS TR-DLS User’s Manual

5. OS Driver Installation

5. Driver Installation

Select “Network adapters” in Hardware Type and Click Next.

Click Have Disk…. Select A: floppy diskette for the network driver and
click OK.

Select “Intel® PRO/100 S PCI Adapter” from the listed Network Adapters.
Click Next. System would prompt you an Update Driver Warning message.
Click Yes to continue installing driver.

10. Click Finish. Windows 2000 system will prompt if you want to restart the

system now. After system been restarted, the new driver will be loaded into
the system.

III.

ATI Rage XL Display Driver Installation

Windows 2000 system can correctly recognize ATI RAGE XL PCI driver during
system installation. User needs not to load any driver for supporting the on-board
ATI RAGE XL graphics chip.

NOTE:

You may also update the ATI Rage XL driver from the TR-DLS

support CD.

IV.

Enabling ATA100 Feature Under Windows 2000

To enable the ATA100 feature under Windows 2000, you need to upgrade to Windows
2000 Service Pack 2.

Win2000 Server

This manual is related to the following products:

TR-DLS