Asus TR-DL - Manual (Page 62)

ASUS TR-DLS User’s Manual 62
4. BIOS SETUP
4. BIOS SETUP
Power Menu
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Disabled] leaves your system off. [Previous State] reverts your
system to the same state before the power interruption. Configuration options:
[Disabled] [Previous State]
Onboard LAN Power Up [Disabled]
Power Up on PCI Card [Disabled]
These fields allow you to boot your computer from another computer by sending a
wake-up frame or signal to the LAN device, or the PCI modem card if present.
Configuration options: [Disabled] [Enabled]
4.5.1 Power Up Control
IMPORTANT: This feature requires an optional network interface card with Wake-
On-LAN feature and an ATX power supply with at least 720mA +5V standby
power.
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on a PS/2 keyboard to turn on the
system. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
IMPORTANT: This feature requires an optional network interface card with Wake-
On-LAN feature and an ATX power supply that can supply at least 350mA on the
+5VSB lead.
You must set the KBPWR jumper to pins 2-3 (5VSB) before you enable this function
(refer to page 22 for the jumper location).