Asus TR-DL - Manual (Page 75)

ASUS TR-DLS User’s Manual 75
5. OS Driver Installation
5. Driver Installation
5.1 Microsoft Windows NT Server 4.0
I. LSI SCSI Driver Installation
Windows NT 4.0 do not have drivers for such new SCSI controllers, the user must
load the driver manually prior to Windows NT 4.0 installation.
A. Preparing a LSI Driver Diskette
The drivers are located on the ASUS Driver Support CD at:
\Drivers\Sdms\Drivers\WINNT
Copy all the files and subdirectory under the WINNT subdirectory to the root
directory of a clean floppy diskette. Use this LSI driver diskette during installation.
(-or-) Use the self-extracting image files for Windows NT drivers.
The LSI_U3.SYS executable driver is on ASUS Driver Support CD at:
\Drivers\Sdms\Diskimag\NT40.exe
B. New System Installation
This procedure installs the LSI_U3.SYS driver onto a Windows NT system. Use
this procedure when installing Windows NT onto an unused SCSI drive. Windows
NT automatically adds the driver to the registry and copies the driver to the appropriate
directory. There are two methods to install the Windows NT system. One is installed
by booting from NT CD Disc; the other is by booting from NT three installation
floppy diskettes.
B1. CD-ROM Installation
1. Start the Windows NT installation by booting from the Windows NT
CD-ROM. The system BIOS must support booting from a CD-ROM. LSI
BIOS settings may need to be changed to allow CD-ROM booting when
using SCSI-interface CD-ROM drive.
2. When the screen displays “Windows NT Setup”, immediately press the F6
key. This must be done or else the new driver installed from the LSI driver
diskette will not be recognized.
WinNT4.0 Server