Asus TR-DL - Manual (Page 81)

ASUS TR-DLS User’s Manual 81
5. OS Driver Installation
5. Driver Installation
5.2 Microsoft Windows 2000 Server
I. LSI SCSI Driver Installation
User only need to load the driver manually when the TR-DLS M/B has build-in with
LSI SYM53C1010 SCSI controller.
A. Preparing a Symbios Driver Diskette
The drivers are located on ASUS Driver Support CD at:
\Drivers\Sdms\Drivers\Win2k
Copy all the files and subdirectory under the Win2k subdirectory to the root directory
of a clean floppy diskette. Use this LSI driver diskette during installation. (-or-) Use
the self-extracting image files for Windows 2000 drivers.
For the LSI_U3.SYS driver, the executable file is located here:
\Drivers\Sdms\Diskimag\Win2k.exe
B. New System Installation
The LSI_U3.SYS drivers are non-bundled drivers. The LSI_U3.SYS driver supports
the LSI SYM53C1010 controller. To install Windows 2000 on a new system, the
system BIOS must support booting from a CD-ROM. LSI BIOS settings may need
to be changed to allow CD-ROM booting.
1. Start the Windows 2000 installation by booting from the Windows 2000 CD-
ROM.
2. For installation of the LSI_U3.SYS drivers, when the screen displays
“Windows 2000 Setup”, press the F6 key to install the LSI_U3.SYS drivers.
This must be done or else these new drivers is not recognized.
3. If F6 is not pressed, the user is still given the opportunity to load additional
drivers later in the installation process. However, any driver loaded at this
later time is not recognized and no devices controlled by that driver are
available during Windows 2000 Setup.
4. When prompted for the manufacturer-supplied hardware support disk, insert
the appropriate LSI driver diskette containing the Windows 2000 driver
required to support your LSI adapter(s) and press Enter. The LSI Driver
diskette is creating prior to installing Windows 2000.
Win2000 Server