Asus TR-DL - Manual (Page 95)

ASUS TR-DLS User’s Manual 95
5. OS Driver Installation
5. Driver Installation
7. If the driver is the one that you want to install, type Y for yes or press Enter.
If the driver is not the one you want to install, type N for no. If you specify
yes, the install.sh script installs the driver you indicated as well as bootmod
and bootbin patches.
8. When the installation has completed, and the install.sh script exits, un-mount
the diskette by typing at the command prompt:
# cd /
# umount /mnt
9. Remove the Solaris Driver ITU diskette from the diskette drive.
10. Reboot your machine by typing at the command prompt:
# touch /reconfigure
# reboot
11. If you have not already done so, turn off your system, add the new hardware,
and turn on your system again.
12. At the << Current Boot Parameters >> prompt, type:
b -r
to force reconfiguration of the machine. When the Solaris operating environment
is finished booting and running, the new devices whose drivers you installed
are available for use.
II. Intel 82550 Network Driver Installation
Solaris7 and Solaris8 system can correctly recognize Intel 82550 controller by itself
at installation step. User didn’t need to load the network driver for the onboard LAN
device.
III. ATI Rage XL Display Driver Installation
Solaris 7 cannot support ATI Rage XL graphic default, user can configure the graphic
as a “Standard VGA” device for supporting Solaris X Window.
SUN Solaris Server