Bios setup, 1 primary & secondary master/slave – Asus TR-DL User Manual

Page 49

ASUS TR-DLS User’s Manual

4. BIOS SETUP

4. BIOS SETUP

Master/Slave Devices

4.3.1 Primary & Secondary Master/Slave

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, Setup automatically fills in the correct values for the remaining fields
on this sub-menu. If automatic detection fails, this may be because the hard disk
drive is too old or too new. If the hard disk was already formatted on an older system,
Setup may detect incorrect parameters. In these cases, select [User Type HDD] to
manually enter the IDE hard disk drive parameters. Refer to the next section for
details.

CAUTION!

Before attempting to configure a hard disk drive, make sure you

have the correct configuration information supplied by the drive manufacturer.
Incorrect settings may cause the system to fail to recognize the installed hard
disk.

This manual is related to the following products:

TR-DLS