Asus TR-DL - Manual (Page 21)

ASUS TR-DLS User’s Manual 21
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
1. SCSI Settings (3-pin SCSIEN)
This jumper allows you to enable or disable the onboard SCSI function. Set to
Enable (pins 1-2) if you wish to use SCSI devices.
2. VGA Settings (3-pin VGAEN)
This jumper allows you to enable or disable the onboard VGA function. Set to
Enable (pins 1-2) if you wish to use the onboard VGA capability. Set to Disable
(pins (2-3) if you install a VGA card.
TR-DLS
TR-DLS SCSI Setting
SCSIEN
(Default)
1
2
Enable Disable
2
3
TR-DLS
TR-DLS VGA Setting
VGAEN
Enable
(Default)
1 2
Disable
2 3
3.4.2 Jumpers
The jumpers on the motherboard allow you to change some feature settings to suit
your customized system configuration.
IMPORTANT! Before changing any jumper setting, make sure to read the jumper
descriptions and setting requirements in this section.