Bios setup – Asus TR-DL User Manual

Page 50

ASUS TR-DLS User’s Manual

4. BIOS SETUP

4. BIOS SETUP

Master/Slave Devices

[User Type HDD]

Manually enter the number of cylinders, heads and sectors per track for the drive.
Refer to the drive documentation or on the drive label for this information.

NOTE: After entering the IDE hard disk drive information into BIOS, use a
disk utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk. Make
sure to set the partition of the Primary IDE hard disk drives to active.

If no drive is installed or if you are removing a drive and not replacing it, select
[None].

Other options for the Type field are:

[CD-ROM] - for IDE CD-ROM drives

[LS-120] - for LS-120 compatible floppy disk drives

[ZIP] - for ZIP-compatible disk drives

[MO] - for IDE magneto optical disk drives

[Other ATAPI Device] - for IDE devices not listed here

After making your selections on this sub-menu, press the key to return to the
Main menu. When the Main menu appears, the hard disk drive field displays the size
for the hard disk drive that you configured.

This manual is related to the following products:

TR-DLS