Asus P/I-P55TP4N - Manual (Page 15)

P/I-P55TP4N User's Manual 9
III. INSTALLATION
(Jumpers)
III. INST
ALLA
TION
3. Total Level 2 Cache Size Setting (JP16)
This jumper sets the total amount of L2 cache that is present. If you
have two cache chips onboard (see "Map of Motherboard" for locations),
then you have either 256KB or 512KB. An "ASUS" or "COAST" cache
module can be used to upgrade the 256KB version to 512KB. If there is
no onboard cache, you must install a cache module of either 256KB or
512KB. IMPORTANT: See page 14 "SRAM Cache" for installa-
tion procedures. Regardless of your cache combination, set the fol-
lowing jumpers according to the total amount of L2 cache that is present
onboard and installed as a module.
Selections JP16
256KB [2-3] (Default)
512KB [1-2]
Total L2 Cache Size Setting (256KB / 512KB)
1
2
3
256KB 512KB
1
2
3
JP16 JP16
4. Voltage Regulator Output Selection (JP22, 23, 24)
These jumpers set the voltage supplied to the CPU.
Selections JP24 JP23 JP22
STD 3.3V-3.465V [open] [open] [short] (Default)
VRE 3.4V-3.6V [open] [short] [open]
Voltage Regulator Output Selection (STD / VRE)
STD 3.3V - 3.465V
(Default) VRE 3.4V - 3.6V
JP24 JP23 JP22 JP24 JP23 JP22