Asus P/I-P55TP4N - Manual (Page 14)

P/I-P55TP4N User's Manual 8
III. INSTALLATION
(Jumpers)
III. INST
ALLA
TION
Jumper Settings
1. Onboard Multi-I/O Selection (JP4)
You can selectively disable each onboard Multi-I/O item (floppy, serial,
parallel, and IrDA) through BIOS (see page 35) or disable all Multi-I/O
items at once with the following jumper in order to use your own Multi-
I/O card.
Selections JP4
Enable [1-2] (Default)
Disable [2-3]
1
Multi I/O Setting (Enable / Disable)
2
3
JP4
Enable (Default) Disabled
1
2
3
JP4
2. Flash ROM Boot Block Programming (JP5)
This sets the operation mode of the boot block area of the BIOS Flash
ROM to allow programming in the Enabled position.
Programming JP5
Disabled [1-2] (Default)
Enabled [2-3]
Boot Block Programming (Disable / Enable)
Disabled (Default) Enabled
1
2
3 1
2
3
JP5 JP5