Asus GigaX2024X - Manual (Page 86)

GigaX Series L2 Managed Switch User’s Guide
86
[MAC Address]
[VLAN ID]
[Port Selection]
User can add or modify a static ARL entry by specifying a MAC address, VLAN
ID, port number, and trunk ID.
CLI command : l2 arl static
[Remove]
Static ARL entries can be deleted by indicating the MAC address and its VLAN
ID. These two-field combination is formed as unique entry in ARL table.
CLI command : l2 arl delete
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 arl retrieve
[Show VLAN]
Displays the existing VLAN information of the switch.
CLI command : l2 vlan show
[Name]
[VLAN ID]
Allows user to config the VLAN settings. User may create a new VLAN by
giving a unique VLAN ID, a VLAN description name, and its port member list,
note that the port member here is indicated as tagged port member. To specify
a VLAN port member as untagged port, CLI command utportadd can achieve
this purpose. User may use CLI command add or remove to further add some
port members to a VLAN or exclude some existing port members from a
VLAN.