Asus GigaX2024X - Manual (Page 85)

GigaX Series L2 Managed Switch User Guide
85
CLI command : l2 rate set [2:broadcast and multicast, 3:broadcast, multicast and unknown unicast )>
]
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 rate retrieve
[Aging Time]
User can set the ARL (Address Resolution Logic) entries aging time by setting
the aging time value.
CLI command : l2 arl age [aging time value]
[Query by Port]
ARL entries existed in ARL table can be queried according to port number.
CLI command : l2 arl port
[Query by VLAN ID]
ARL entries existed in ARL table can be queried according to VLAN ID.
CLI command : l2 arl vlan
[Query by MAC Address]
ARL entries existed in ARL table can be queried according to MAC address.
CLI command : l2 arl mac [vlan id]